This model is interesting because having high performance is small-sized and versatile (in its equipment class).
Climatic performance in accordance with
|
УХЛ 4.2 |
Degree of protection: |
IP 3.0 |
Drive Type: |
pneumatic, electrical |
КClass purity of the compressed air in accordance with GOST 17433: |
not worse than 8 |
Power supply: |
200V, 1F |
Maximum power consumption: |
5,0 kW |
Average power consumption: |
3,0 kW |
Compressed air pressure: |
6 - 10 bar |
Maximum air consumption: |
0,75 m3/min |
Average (nominal) compressed air consumption: |
0,6 m3/min |
Type of coolant: |
Tap water, industrial water, antifreeze, glycol solutions (liquid or reusable with water cooler) |
Maximum consumption of coolant: |
2,5 l/min |
The method of heating the material: |
contact, one-sided |
Molding method: |
pneumatic |
Method for separating the products: |
diversed cutting tools |
Types of manufactured products: |
negative |
Maximum dimensions of manufactured products: |
250 × 350 mm, 226 × 336 mm for cutting out |
Maximum depth of manufactured products: |
55 mm |
Plastics types: |
HIPS, SB, OPS, PVC, PET |
Plastics thickness: |
0,18 - 0,4 mm |
Maximum width of plastics: |
250 mm |
Maximum roll diameter of plastics: |
500 mm |
Maximum weight of a plastics roll: |
50 kg |
Performance: |
6,7 - 20 cycles/min |
Guaranteed load factor when changing tooling is not more than 1 time per week: |
0,91 |
Overall dimensions (length × width × height): |
2950 × 770 × 1390 mm |
Weight:: |
650 kg |
Average changeover time: |
2,0 hours |
One of the basic principles of our work is to meet as much as possible the demands of our customers, to be attentive to them during the whole operating period of the supplied equipment. Our customer relationship is not limited to a warranty period.