MAT-300 model uses low-cost and fast-manufactured moulds!
MAT-300 is a thermoforming machine with a larger forming area. Its main task is to form from PS,PET, PVC chocolate trays, trays, pallets, although it can also be used for the manufacture of blister packaging, at your option.
In the forming unit of MAT-300 (as in the MAT-150 model) a lever mechanism is used which has proved to be excellent for many years of operation at our customers, so even with the maximum dimensions of the molded products (310х410 mm) and the forming depth up to 55 mm this model has the speed of 1200 cycles per hour.
Climatic performance in accordance with
|
УХЛ 4.2 |
Degree of protection: |
IP 3.0 |
Drive Type: |
pneumatic |
КClass purity of the compressed air in accordance with GOST 17433: |
not worse than 8 |
Power supply: |
380V, 3F |
Maximum power consumption: |
6,0 kW |
Average power consumption: |
3,0 kW |
Compressed air pressure: |
5 - 10 bar |
Maximum air consumption: |
0,8 m3/min |
Average (nominal) compressed air consumption: |
0,7 m3/min |
Type of coolant: |
Tap water, industrial water, antifreeze, glycol solutions (liquid or reusable with water cooler) |
Maximum consumption of coolant: |
4,0 l/min |
The method of heating the material: |
contact, one-sided |
Molding method: |
pneumatic |
Method for separating the products: |
cutting |
Types of manufactured products: |
negative |
Maximum dimensions of manufactured products: |
310 × 410 mm |
Maximum depth of manufactured products: |
55 mm |
Plastics types: |
HIPS, SB, OPS, PVC, PET |
Plastics thickness: |
0,18 - 0,5 mm |
Maximum width of plastics: |
310 mm |
Maximum roll diameter of plastics: |
500 mm |
Maximum weight of a plastics roll: |
70 kg |
Performance: |
7,5 - 20 cycles/min |
Guaranteed load factor when changing tooling is not more than 1 time per week: |
0,91 |
Overall dimensions (length × width × height): |
2950 × 770 × 1390 mm |
Weight:: |
550 kg |
Average changeover time: |
2,0 hours |
The reliability of our equipment is due to many years of experience on the market of thermoforming equipment and moulds, as well as the use of component parts of only well-known manufacturers.