The MAT-500SV model has been manufactured since 2006.
This is an automatic thermoforming machine; this model is versatile in terms of the product range made of rigid plastic: cups, jars, cake domes, salad bowls, plates, ice-cream bowls, chocolate trays, ice-cream containers, egg trays, substrates for semi-finished products, trays for confectionery products and biscuits, blister package – all made by MAT-500SV Universal.
Climatic performance in accordance with
|
УХЛ 4.2 |
Degree of protection: |
IP 3.0 |
Drive Type: |
pneumatic |
КClass purity of the compressed air in accordance with GOST 17433: |
not worse than 8 |
Power supply: |
380V, 3F |
Maximum power consumption: |
28,5 kW |
Average power consumption: |
8,5 kW |
Compressed air pressure: |
6 - 10 bar |
Maximum air consumption: |
2,0 m3/min |
Average (nominal) compressed air consumption: |
1,8 m3/min |
Type of coolant: |
Multiturn cooling water cooler |
Maximum consumption of coolant: |
10 L/min |
The method of heating the material: |
Non-contact, two-sided |
Molding method: |
Pneumatic with pre-punch hood |
Method for separating the products: |
Combined cutting Cutting tools |
Types of manufactured products: |
Negative, positive, negative and positive |
Maximum dimensions of manufactured products: |
440 × 330 mm |
Maximum depth of manufactured products: |
130 mm |
Plastics types: |
HIPS, SB, OPS, PVC, PET, PP |
Plastics thickness: |
HIPS, SB, OPS, PVC, PP: 0,15 - 0,8 mm
|
Maximum width of plastics: |
490 mm |
Maximum roll diameter of plastics: |
800 mm |
Maximum weight of a plastics roll: |
300 kg |
Performance: |
10 - 25 cycles/min |
Guaranteed load factor when changing tooling is not more than 1 time per week: |
0,91 |
Overall dimensions (length × width × height): |
3366 × 1550 × 2023 mm |
Weight:: |
1600 kg |
Average changeover time: |
1,5 hours |
The reliability of our equipment is due to many years of experience on the market of thermoforming equipment and moulds, as well as the use of component parts of only well-known manufacturers.