MAT-150FFS

sta-150shv-pm

Thermoforming packaging line of “MultiPack“ series, model MAT-150FFS with blisters forming function from roll film, filling blisters followed by welding with the cover material and the contour cutting.

Purpose - MAT-150FFS model allows you to pack efficiently and profitably a wide range of products, including groceries, industrial and consumer goods, medical supplies.

 MAT-150FFS equipment list according to basic configuration:

  • film roll unwinder;
  • heating unit;
  • forming unit;
  • operator-stacker workplace (packing goods in a blister performed manually);
  • unwinding cover material unit;
  • welding unit;
  • supply unit;
  • contour cutting unit;
  • output tray;
  • control panel, pneumatic panel.

All components are set on a overall frame; all operations except packing goods in a blister, are performed automatically.

Further provided options aren’t included in basic equipment configuration price and are supplied according to technical project that was agreed with the customer:

  • molded plastic material punch device (is set in a forming unit and provided for the blisters, that required forming material pre-stretch);
  • installation of the coating material unit (cardboard or plastic cards);
  • dater
  • goods-by-piece stacker into a blister

“MultiPack” series thermoformers can be made according to individual technical project for solving your own production problems.

Machine specifications:

Climatic performance in accordance with GOST 15150-69:
УХЛ 4.2
Power supply:
380V, 3F, 50Gz
Maximum power consumption:
7,5 kWt
Compressed air pressure:
0.6 - 0.7 MPa
Average (nominal) compressed air consumption:
1.25 m3/min
Type of coolant:
Flowing water with a temperature of not more than 24°С
Maximum dimensions of manufactured products:
210 × 285 mm
Maximum depth of manufactured products:
60 mm
Plastics types:
PVC, РЕТ, SВ, HIPS (provided the possibility of welding thereto of the coating material)
Plastics thickness:
0,25 - 0,5 mm
Maximum cutting contour shift according to forming contour:
1 mm
Maximum cutting contour shift according to forming contour:
2 mm
Method for adjusting the contours of the coating material:
by periodically entering corrections from the control panel
Coating material:
  • rolled foil or paper with thermo lacquer (feature considered in the basic configuration);
  • carton cards with thermo lacquer (node stacking cardboard cards available as an option).
Stacking products into the blister:
Manual (in basic configuration)
Welding method:
hotpressing
Performance:
8 - 15 cycles/min (depending on material thickness and type and the number of places in the form)
Overall dimensions (length × width × height):
5500 × 1110 × 1800 mm
Weight:
970 kg

* thermic lacquer should provide material welding to a specific type(s) of the film.

 

Автор : btamedia

Menu

Why us?

"We do it today, others will think about it only tomorrow" – here is a principle by which our company is guided since 1997. That’s why our equipment enjoys popularity not only among small and medium enterprises, but also among well-known large enterprises which have a continuous production process.