Automatic thermoforming machine
СТА-500К is a multi-purpose automatic thermoforming line which provides a particularly high hourly efficiency while manufacturing sophisticated products (lunch boxes, snack boxes, closing trays, lids of complicated configuration) in large amount.
The operation scheme of this model is separate forming and punching, stacking and counting of finished products in automatic mode.
Placing the products in the mould in several rows allows to use to the maximum the forming area and allows to reduce the waste percentage.
Punched products are automatically fed from the punching tool up into the stacking unit. The number of finished products is counted and every 50 or 100 cycles (at your option) alarms an audible signal.
All this ensures a high comfort in the equipment control.
Specimens of the package that can be formed on the model СТА-500К:
| Forming area, mm (max.) | 290х498 |
| Forming depth, mm (max.) | 55 |
| Capacity (cycles/hour) | - up to 1620 for PS, PET, PVC; - up to 1200 for РР (at 0.6 MPa) depending on the product dimensions and the material thickness |
| Non-moldable product edge (mm), no less | 12 |
| СAverage power consumption | 8 |
| Electric power supply | 380 V, 50 Hz (3-phase) (3-х фазное) |
| Overall dimensions | 6930х1765х1726 |
| Weight, kg | |
| Average air consumption | 70 l/cycle (0.5 MPa) |
| Water consumption | 10 l/min |
| Averaged changeover time, hour | 1,5 |
| Roll weight max., kg | 300 |
| Film heating | Non-contact |
| Film thickness (mm) | 0,15…..0,8 |
| Processed materials | PP, PS, PVC, PET |
