Automatic thermoforming equipment СТА-150М Alpha:
(the СТА-150 model modification)
The purpose is to manufacture using the blow molding method in the negative duralumin moulds products such as a blister, a chocolate tray, a box, a rectangular tray with individual cutting off made of film roll material PVC, PET, PS, OPSaccording to the non-waste technology.
Operated by one operator.
Machine specifications
|
Forming area, mm (max.) |
250х350 |
|
Forming depth, mm (max.) |
55 |
|
Capacity (cycles/hour) |
15-30 depending on the product dimensions and the material thickness |
|
Non-moldable product edge (mm), no less |
5 (for certain products it is possible to reduce up to 3) |
|
Average power consumption |
2,2 |
|
Electric power supply |
220 V, 50 Hz (1-phase) |
|
Overall dimensions |
1925х637х1572 |
|
Weight, kg |
400 |
|
Average air consumption |
20 l/cycle (0.4 MPa) |
|
Water consumption |
2.5 l/min |
|
Averaged changeover time, hour |
0,5 |
|
Roll weight max., kg |
70 |
|
Film heating |
Contact |
|
Film thickness (mm) |
0,14….0,6 |
|
Processed materials |
PVC, PET, PS, OPS |
